Figure 11: PC G-DEC30 Preset Editor.
In order to receive a Sysex preset, connect your DEC to the PC as described in this document, and initiate a
"DUMP PRST" or a "DUMP ALL" from the utility menu as shown in figure 12.
Figure 12: Dump preset and Dump all.
You can then save the preset, or preset dump, using the save command in the file menu (see figure 13).
Figure 13: Save preset.
©2005 FMIC
The Trademarks referenced herein, not owned by FMIC, are trademarks owned by their respective owners.
All rights reserved.