Fender B-DEC30 Midi Manual page 18

Figure 21: Setting up SysEx Librarian for an external MIDI device.
The next step is to set the application into Record mode. Because the DEC uses three separate SysEx
messages (a header, the body, and a footer) to transfer preset data, click on the "Record Many" icon in the
upper right of the application window. You should now see a temporary window show up telling you that
the application is waiting for SysEx messages as shown in figure 22.
Now we go to the DEC which should be properly connected to the UNO via standard MIDI cables. To
dump one preset, select the preset you would like to store on the Macintosh using the large data wheel.
Then press the Utility button three times until the "DUMP PRST" menu item is highlighted. Then, press the
Save button to dump the preset. The SysEx Librarian application should immediately respond and after the
preset is dumped should show that three messages have been received for a total of 62 bytes (will show 66
bytes for the B-DEC30) as shown in figure 23. If less bytes have been received then the preset was not
properly dumped. Try again.
Figure 22: SysEx Librarian waiting for SysEx messages from an external device.
©2005 FMIC
The Trademarks referenced herein, not owned by FMIC, are trademarks owned by their respective owners.
All rights reserved.