Lexmark E350d Menus And Messages Manual page 30

Message
Load <src> with <Custom Type Name>
Load <src> with <Custom String>
Load <src> <size>
Load <src> <type> <size>
Maintenance
Menus Disabled
Network
Network Card Busy
Not Ready
Parallel
Performing Self Test
Power Saver
Printing Directory List
Printing Font List
Printing Menu Settings
Printing Device Statistics
Printing Quality Test Pages
Prog Engine Code
DO NOT POWER OFF
Program Flash
DO NOT POWER OFF
Prog System Code
DO NOT POWER OFF
Ready
Remove Paper
Standard bin
Understanding printer messages
Action
• Load the input source with the correct type and size media.
• Cancel the current job.
Replace the maintenance items and, if necessary, reset the printer maintenance
counter.
The printer menus are disabled. You cannot change the printer settings from the
control panel.
Note: You can still cancel a job.
Contact your system support person.
A network interface is the active communication link.
An internal print server (also called an internal network adapter or INA) is being reset.
Wait for the message to clear.
The printer is not ready to receive or process data. Someone pressed
printer offline. Press
A parallel interface is the active communication link.
The printer is running the series of start-up tests it performs after it is turned on. Wait
for the message to clear.
• Send a job to print.
• Press to warm the printer to normal operating temperature and display the
Ready message.
The printer is processing or printing a directory of all files stored in flash memory. Wait
for the message to clear.
The printer is processing or printing a list of all available fonts for the specified printer
language. Wait for the message to clear.
The printer is processing or printing the menu settings page. Wait for the message to
clear.
The printer is printing statistical information about the printer. Wait for the message to
clear.
The printer is formatting and printing the Print Quality Test, which consists of 4 pages.
Page 1 contains a mixture of graphics and text, pages 2 and 3 contain only graphics,
and page 4 is a blank page. If Duplex is turned on, then the pages are duplexed;
otherwise, they are simplexed. Wait for the message to clear.
The printer is programming new engine code. Wait for the message to clear and the
printer to reset.
Warning: Do not turn the printer off while this message is displayed.
The printer is storing resources, such as fonts or macros, in flash memory. Wait for the
message to clear.
Warning: Do not turn the printer off while this message is displayed.
The printer is programming new system code. Wait for the message to clear and the
printer to reset.
Warning: Do not turn the printer off while this message is displayed.
Send a job to print.
The standard output bin is full.
30
to make the printer ready to receive jobs.
to take the