Recording An Outgoing Message (Ogm) On An External Tad; Multi-Line Connections (Pbx); External And Extension Telephones; Connecting An External Or Extension Telephone - Brother MFC-J220 Basic User's Manual

Hide thumbs Also See for MFC-J220:
Table of Contents

Advertisement

Recording an outgoing
message (OGM) on an
external TAD
Timing is important in recording this message.
The message sets up the ways to handle both
manual and automatic fax reception.
a
Record 5 seconds of silence at the
beginning of your message. (This allows
your machine time to listen for the fax
CNG tones of automatic transmissions
before they stop.)
b
Limit your speaking to 20 seconds.
c
End your 20-second message by giving
your Fax Receive Code for people
sending manual faxes. For example:
"After the beep, leave a message or
send a fax by pressing l 5 1 and Start."
Note
We recommend beginning your OGM with
an initial 5-second silence because the
machine cannot hear fax tones over a
resonant or loud voice. You may try
omitting this pause, but if your machine
has trouble receiving, then you must
re-record the OGM to include it.

Multi-line connections (PBX)

We suggest you ask the company who
installed your PBX to connect your machine.
If you have a multi line system we suggest
you ask the installer to connect the unit to the
last line on the system. This prevents the
machine being activated each time the
system receives telephone calls. If all
incoming calls will be answered by a
switchboard operator we recommend that
you set the Receive Mode to Manual.
We cannot guarantee that your machine will
operate properly under all circumstances
when connected to a PBX. Any difficulties with
sending or receiving faxes should be reported
first to the company who handles your PBX.
Telephone services and external devices
External and extension
telephones
6
Connecting an external or
extension telephone
You can connect a separate telephone to
your machine as shown in the diagram below.
Connect the telephone line cord to the jack
labeled EXT.
Before you connect the external telephone,
remove the protective cap (3) from the EXT.
jack on the machine.
3
1 Extension telephone
2 External telephone
6
3 Protective Cap
When you are using a telephone on the same
phone line, the LCD shows Telephone.
6
6
6
1
2
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j265wMfc-j270wMfc-j410wMfc-j415w

Table of Contents