Connecting To A Computer (Digital And Analog Rgb) - Sanyo PLC-XT35 Owner's Manual

Installation
Connecting to a Computer (Digital and Analog RGB)
Cables used for connection
• VGA Cable (HDB 15 pin)*
• DVI-Digital Cable
• BNC Cable
(*One cable is supplied; other cables are not supplied with the projector.)
Monitor
Input
VGA
cable
ANALOG
OUT
✔Notes:
• When the AUDIO OUT is plugged-in, the projector's built-
in speaker is not available.
• USB cable connection is needed when operating the
computer with the remote control.
• See page 73 for ordering optional cables.
Unplug the power cords of both the projector and external
equipment from the AC outlet
0
• USB Cable
• Audio Cables (Mini Plug [stereo] x 2)
Audio
Monitor Output
Output
Audio
BNC
cable
cable
(stereo)
AUDIO
G B R H/V V
IN
before connecting cables.
Monitor Monitor
USB port
Output Output
VGA DVI-Digital USB
cable cable cable
ANALOG DIGITAL
IN (DVI-D)
External Audio Equipment
Audio Input
USB
Audio cable
(stereo)
AUDIO OUT
(stereo)