Connecting To A Computer (Digital And Analog Rgb) - Sanyo PLC-XTC50L Owner's Manual

Installation

Connecting to a Computer (Digital and Analog RGB)

Cables used for connection
• VGA Cable (Mini D-sub 15 pin) (One cable is supplied)*
• DVI-Digital Cable *
• BNC Cable *
USB port
USB
cable
USB
✔Notes:
• USB cable connection is needed when operating the
computer with the remote control.
• When the Standby mode is set to "Eco" in the Setting,
MONITOR OUT and AUDIO OUT are disabled. (p.54)
• See page 79 for ordering optional cables.
Unplug the power cords of both the projector and external
equipment from the AC outlet
20
*
)( =Cables are not supplied with this projector.)
• Serial Control Cable *
• USB Cable *
Monitor
Output
Monitor Output
BNC DVI-Digital
cable cable
DIGITAL
G B R H/V V
(DVI-D)
before connecting cables.
Monitor
Monitor
Input
Output
Serial
VGA VGA
Control
cable cable
Cable
MONITOR
ANALOG
OUT
IN
Serial
Output
CONTROL
PORT