Transfer With Camp-On; Transfer To Voicemail; Call Waiting - Samsung OfficeServ 100 Series User Manual

Idcs keyset
Hide thumbs Also See for OfficeServ 100 Series:
Table of Contents

Advertisement

first station to hang up, simply press another DSS button. OR
Press the CALL button or C.O. line key to return to the outside party and begin
the transfer process again.
When you are transferring a call to a keyset set for Voice Announce or Auto
Answer, the transferred call will always ring.
NOTES:
1.
After the inside party answers, you may alternate back and forth between the
parties by pressing the TRANSFER key.
2.
If you receive No More Calls tone, that station has no key available to receive
another call. Press TRANSFER to return to the other party.
3.
You cannot transfer an Intercom call by pressing a DSS key.You must press the
TRANSFER key and dial the destination extension number.

TRANSFER WITH CAMP-ON

When you are transferring a call to another station and you receive a busy signal,
you may camp the call on to this station. Simply hang up when you hear the busy
signal. The called party will be alerted that a call is waiting for them.
NOTE: If you receive No More Calls tone, that station has no key available to receive
another call. Press TRANSFER to return to the outside caller.

TRANSFER TO VOICEMAIL

This feature is used to send a call directly to a voice mailbox.Your keyset must have
a correctly programmed VT key to accomplish this. To transfer a call directly to a
voice mailbox:
While on a call, press the VT key and dial the mailbox number.
Hang up when dialing is completed.

CALL WAITING

If an outside call has been camped-on to your phone or another station has
camped-on to you:
Your keyset will ring and the call that is waiting for you (camped-on) will flash
green.
Press the flashing button to answer; your other call will go on hold automati-
cally if your station has the Automatic Hold feature set. If not, you must press
HOLD and then the flashing button. OR
Finish the first call and hang up; the waiting call will ring.
Lift the handset or press the ANS/RLS key to answer.
NOTE: Intercom calls will not go on Automatic Hold.
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Officeserv 500 seriesOfficeserv 7000 series

Table of Contents