When You Want To Use Batch Separation For Scanning - Canon imageFORMULA DR-C225 2 User Manual

Set [Full Automatic Mode] in [Favorite Settings] to scan with scanning
conditions that match the document.
When [Full Automatic Mode] is selected, [Color mode], [Page Size],
and [Dots per inch] are all detected automatically. In addition, the
[Scanning Side] setting becomes [Skip blank page] and [Document
Orientation] becomes [Text orientation recognition].
When you want to use batch separation for
scanning
###HOME > Chapter 7 Special Scanning > When you want to use batch
separation for scanning###
When you want to divide and scan a document, you can separate a batch
at the timing with which each next document is placed and scanned. In
this case, set the scanner driver as follows.
 Set [Feeding Option] on the [Feeding] tab to [Panel-Feeding] or
[Automatic Feeding].
52