Canon imageFORMULA DR-C225 2 User Manual page 28

3
Click [CANON DR-C225 USB] and click [Properties].
(The [Events] tab may not be displayed, depending on the model.)
4
Click the [Maintenance] tab, and then select a Long Document mode.
Select [Long Document mode (1,000 mm)] or [Long Document mode (3,000
mm)] depending on the length of the document.
5
Click [OK].
Setting Scanning Conditions
Configure scanning conditions as follows when scanning documents in
Long Document mode.
CaptureOnTouch
Set [Page Size] to [Match original size] under [Scanner setting].
Scanner driver
Set [Page Size] to [Match original size] in the [Basic] tab. ("Confirming
Basic Conditions for Scanning" on p.34)
28