Aux In Mode; Specification - Blaupunkt BT02 Owner's Manual

BT02
speaker, connect the another 3.5mm jack to the AUX IN
jack on any external audio player, it will be as a player for
external audio player.
7. In FM mode, you can press and hold the
and change to other modes.
8. When finished listening, slide the Power ON/ OFF Switch
to OFF position to shut off the speaker.

AUX IN MODE

1. Connected the 3.5mm jack on the supplied audio cable to
the AUX OUT/Line OUT/Phones jack on any external audio
player, connect the another 3.5mm jack to AUX IN jack on
the speaker.
2. Slide the Power ON/OFF Switch to ON position to turn on
the speaker, the Blue indicator is light and enter AUX
mode. Plays the music in the connected Player as usual.
3. During playback, press the
music.
4. In AUX mode, you can plug out the audio cable or press
and hold the
5. When finished listening, slide the Power ON/ OFF Switch
to OFF position to shut off the speaker.
Important:
In the Bluetooth or mircoSD card playback mode, if you plug in
the 3.5mm stereo audio cable, the speaker will switch to AUX
IN play mode automatically.

SPECIFICATION:

· Bluetooth version: 2.1+EDR
· Support L2CAP/A2DP (AVCTP / AVDTP / AVCRP to receive
stereo audio signal and control the Prev/Next operation of
button to exit.
13
button to exit
button to play/pause the