Unloading And Erecting The Switchgear; Packing And Transport Unit; Completeness And Transport Damages - Siemens NXPLUS C Installation And Operating Instructions Manual

Installation
Packing
Transport unit
Checking for
completeness
Checking for transport
damages
100/293
14

Unloading and erecting the switchgear

14.1

Packing and transport unit

The transport units can be packed as follows:
• On pallets, covered with PE protective foil
• In a seaworthy crate (switchgear is sealed with desiccant bags in PE foil)
• Other packings in special cases
Disposal of packing and consumables
Incorrectly disposed of packings and consumables can pollute the environment.
➭ Packing and consumable materials of the switchgear must be disposed of in an
environmentally compatible way or recycled.
➭ Observe local regulations for disposal and environmental protection.
Transport units consist of:
• Individual panels, if applicable with separate low-voltage compartment
• Accessories including busbars
14.2

Completeness and transport damages

➭ Check whether the delivery is complete and correct using the delivery note and packing
lists.
➭ Compare the serial number of the switchgear panels on the delivery note with that on the
packing and the rating plates of the panels.
➭ Check whether the accessories are complete.
➭ Temporarily open the packing in a weatherproof place to detect hidden damages. Stick the
PE foil together again and do not remove it totally until reaching the final mounting position
in order to keep the switchgear as clean as possible.
➭ Check the ready-for-service indicator for SF
service indicator").
➭ Inform the forwarding agent immediately about any defects or transport damages; if
required, refuse to accept the delivery.
➭ As far as possible, document larger defects and transport damages photographically;
prepare a damage report and inform your regional Siemens representative immediately.
➭ Have the transport damages repaired, otherwise you may not start installation.
➭ Refit the packing.
Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • 802-9081.9
NOTICE
gas (see page 105, "Checking the ready-for-
6