Advertisement
Contents
Connections
AUTO STANDBY
When there is no input signal and operation for 15 minutes, this unit
automatically enters the standby mode.
ON:
The unit goes into standby after 15 minutes.
OFF
The unit does not go into standby
(Default):
automatically.
0 For the input source "ANALOG IN" only, when no operation is performed for eight
hours, this unit automatically enters the standby mode.
0 In the following situations, the Auto standby function does not operate.
0 When an iPod (From iPod) is connected to the USB port on the unit.
0 When the source is "TUNER".
0 The default setting for the Auto Standby mode is "OFF".
Front panel
Display
Playback
Settings
CLOCK MODE
The clock is constantly displayed.
ON:
OFF
(Default):
NOTE
0 When CLOCK MODE is set to ON, this unit consumes the same amount of power
as when it is turned on.
52
Rear panel
Tips
Display the clock.
Press the POWER X button to switch
between the clock display and the normal
display.
Does not display the clock.
Remote
Index
Appendix
Advertisement
