Advertisement
Contents
Connections
Setting the preset channels and
changing the received frequency on
the main unit
8/–, +/9 on the main unit can be used both for switching the preset
channel and for tuning.
Before operating them, switch the main unit to the "preset mode" or "tuning
mode" using the procedure below.
1
Press SETUP.
2
Use ui to select "TUNER SETUP", then press ENTER.
3
Use ui to select "MODE SELECT", then press ENTER.
4
Use ui to select "PRESET MODE" or "TUNING MODE",
then press ENTER.
PRESET MODE:
TUNING MODE:
Front panel
Display
Playback
Press 8/–, +/9 on the main unit to
switch preset channels.
This is the same operation as
0
CHANNEL –, + on the remote control
unit.
Press 8/–, +/9 on the main unit to
changethe received frequency.
This is the same operation as TUNE
0
–, + on the remote control unit.
Rear panel
Settings
35
Remote
Tips
Appendix
Index
Advertisement
