Error Code List - JUKI DP-2100 Engineer's Manual

9. ERROR CODE LIST

Pictograph
Error code
E000
E001
E003
E004
E005
E006
E007
E011
Description of error
Contact of initialization of main shaft
EEP-ROM of MAIN p.c.b.
When data is not written in EEP-ROM or data
is broken, data is automatically initialized and
the initialization is informed.
Contact of initialization of main EEP-ROM
of MAIN p.c.b.
When data is not written in EEP-ROM or data
is broken, data is automatically initialized and
the initialization is informed.
Main shaft motor encoder defectiveness
Angle counter of needle UP detection has
exceeded the value equivalent to 1.1 turns.
Angle counter of needle DOWN detection has
exceeded the value equivalent to 1.1 turns.
Main shaft motor needle DOWN detection
defectiveness
Angle counter of needle UP detection has not
exceeded the value equivalent to 1.1 turns.
Angle counter of needle DOWN detection has
exceeded the value equivalent to 1.1 turns.
Main shaft motor needle UP detection
defectiveness
Angle counter of needle UP detection has
exceeded the value equivalent to 1.1 turns.
Angle counter of needle DOWN detection has
exceeded the value equivalent to 1.1 turns.
Contact of initialization of machine head
EEP-ROM of the circuit board mounted
on the machine head
When data is not written in EEP-ROM or data
is broken, data is automatically initialized and
the initialization is informed.
Main shaft motor-lock
When large needle resistance sewing
product is sewn
External media not inserted
External media is not inserted.
− 82
How to recover
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.
Turn OFF the
power.
P o s s i b l e t o
recover by reset.
−
Place of recovery
Previous screen