Table of Contents
Advertisement
The MEM mode provides submodes providing dive planning
data (MEMplan), dive history data (MEMhis), and a dive log-
book (MEMlog).
The compass submode can be called from the TIME or DI-
VE modes.
To toggle between the main modes press the MODE button.
To select a submode in DIVE and MEM mode, press the up/
down buttons.
If a button is not pressed within 5 minutes, the dive computer
beeps and returns to the time mode automatically.
2.4. WIRELESS PRESSURE TRANSMISSION
The D9 can be used together with an optional wireless cy-
linder pressure transmitter that can easily be attached to the
high-pressure port of the regulator (Fig. 2.5). By using the
transmitter the diver can benefi t from cylinder pressure and
remaining air time data.
In order to use the transmitter the wireless integration needs
to be enabled in the D9's settings. To enable or disable the
wireless integration refer to chapter 5.2.8 Tank pressure set-
tings.
Fig.2.3. Active water contacts
are indicated by the text AC.
Fig. 2.4. Time mode. Pres-
sing MODE button switches
main mode.
Fig. 2.5. D9's optional wire-
less pressure transmitter
23
Advertisement
Table of Contents
