Updating Phoenix Installation - Nokia RM-237 Service Manual

Nokia Customer Care
8. To end the installation, click Finish.
Next actions
After the installation,
• installing phone model specific data package for
• configuring users and connections
FPS-10 flash prommer can be used after updating their flash update package files.
Phoenix installation
Updating
Context
• If you already have the
software when new versions are released.
Phoenix , you need to follow the same steps as when installing it for the first time.
• To update
• When you are updating, for example, from version a14_2004_16_4_47 to a15_2004_24_7_55, the update
will take place automatically without uninstallation.
• Always use the latest available versions of both
can be found in the phone model specific Technical Bulletins and phone data package
(shown during installation).
• If you try to update
a15_2004_24_7_55), you are asked if you want to uninstall the existing version. In this case you can choose
between a total uninstallation or a repair installation in a similar way when choosing to uninstall the
application from the
• If you try to install an older version (for example, downgrade from a15_2004_24_7_55 to
a14_2004_16_4_47), installation will be interrupted.
Page 3 –8
Figure 4 InstallShield Wizard Complete
Phoenix can be used after:
Phoenix service software installed on your computer, you need to update the
Phoenix with the same version you already have (for example, a15_2004_24_7_55 to
Windows Control Panel.
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Phoenix
Phoenix and the phone-specific data package. Instructions
Service Software Instructions
readme.txt files
RM-237
Issue 1