Introduction; Read This First; Service Software Installation; Phoenix Installation Steps In Brief - Nokia RH-64 Service Manual

Hide thumbs Also See for RH-64:
Table of Contents

Advertisement

RH-64
Phoenix service software

Introduction

Read this first

The Phoenix software is used to a number of different phones containing different versions of baseband
generations.
These instructions are intended as a general guide and are not product specific, where a Phoenix SW version
is shown you should use the relevant version for your product and in the screen shots where a type designator
is shown you should read the type designator for your product."

Service software installation

Phoenix installation steps in brief

Phoenix is the DCT-4 generation service software for reprogramming, testing and tuning the phone.
To install Phoenix, you need to:
• Connect a DK2 Dongle or FLS-4S POS Flash Device
• Install the Phoenix Service SW
• Install the Data Package for Phoenix
• Configure users
• Manage connection settings (depends on the tools you are using)
Phoenix is now ready for FLS-4S Point Of Sales Flash Device use.
If you use FPS-8:
• Update FPS-8 SW
• Activate FPS-8
• Update JBV-1 Docking Station SW (only when needed)
Phoenix is now ready to be used with FPS-8 flash prommer and other tools as well.
The Phoenix Service Software installation contains:
• Service software support for all phone models included in the package
• Flash update package files for FPS-8* and FLS-4S programming devices
• All needed drivers for:
• DK2 dongle
• FLS-4S point of sales flash device
• USB devices
Note:
Separate installation packages for flash update files and drivers are also available, but it is not
necessary to use them unless updates appear between Phoenix Service SW releases. If separate update
packages are used, they should be used after Phoenix and data packages have been installed.
Supported operating systems
• Windows 2000 and XP.
Hardware requirements for using Phoenix
• Minimum: Processor 300 MHz, RAM memory 64 MB, disk space 100 MB.
• Recommended for Windows 2000: Processor 700 MHz, RAM memory 256 MB, disk space 150 MB.
9243363 (Issue 1)
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Nokia Customer Care
Page 3–5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1600

Table of Contents