Table of Contents
Advertisement
SANTA FE FREESTANDING
1
Important Safety Information
A. Appliance Certification
Model Santa Fe Pellet Appliance
Laboratory OMNI Test Laboratories, Inc.
Report No. 061-S-77d-6.2
Type Solid Fuel Room Appliance/Pellet Fuel
Burning Type
Standard ASTM E1509-04, ULC S627-00 and
ULC/ORD-C1482-M1990 Room
Appliance Pellet Fuel Burning type and
(UM) 84-HUD, Mobile Home Approved.
NOTICE: This installation must conform with local codes. In the absence of local codes you must comply with the ASTM
E1509-04, ULC S627-00, (UM) 84-HUD and ULC/ORD-C-1482-M1990.
This pellet appliance needs periodic inspection and repair for proper operation. It is against federal regulations to operate
this pellet appliance in a manner inconsistent with operating instructions in this manual.
3
The Santa Fe is Certified to comply with
2020 particulate emission standards.
B. BTU & Efficiency Specifications
Emissions Report
EPA Certification #: 175-19
EPA Certified Emissions: 1.1 grams per hour
*LHV Tested Efficiency: 70.4%
**HHV Tested Efficiency: 66.1%
***EPA BTU Output: 5,800 to 22,400 / hr.
****BTU Input: 9,400 to 30,600 / hr.
Hopper Capacity: 52 lbs
* Weighted average LHV efficiency using data collected
during EPA emissions test.
**Weighted average HHV efficiency using data collected
during EPA emissions test.
***A range of BTU outputs based on HHV and the burn
rates from the low and high EPA tests.
****Maximum BTU input based on the high burn section
of the EPA emissions test.
7050-801E
0061PM077E
Number:
3 or 4 "L" or "PL", or 6
Vent Size:
inches
Fuel Premium Wood Pellets
09/20
Advertisement
Table of Contents
