If You're Running Windows Nt 4.0 - Epson Perfection 1640SU Office Scanner Basics

12. After the scanner software installation is complete,
the Screen Calibration utility automatically starts.
You must calibrate your screen and scanner to
reproduce images closely matching the originals.
In the following window, move the slider to the right
or left until the shades of the horizontal gray stripes
appear similar. View the screen from a short distance.
The gray stripes will not perfectly blend together;
however, try to make the two tones match as closely
as possible. For best print results from an EPSON
ink jet printer, select a setting of 1.8.
13. Click to register the calibration setting.
OK
You don't need to change the screen calibration again so long as you
continue to use the same monitor. If you need to recalibrate your screen
at a later time, see your electronic Reference Guide for instructions.
14. The Setup completion dialog box appears. Click
Now you can install your scanner software and bonus software as described on
page 19.

If You're Running Windows NT 4.0 . . .

You may be asked to insert your Windows operating system CD-ROM during the
scanner installation. Have your Windows CD-ROM handy, in case you need it.
1. Make sure your SCSI board and SCSI driver are installed and the scanner is
connected to your computer.
2. Turn on your scanner first, then turn on your computer.
3. Log onto Windows NT
drive.
4. Double-click
icon. The CD-ROM window opens.
5. Double-click
6. The software License Agreement appears. After reading the license agreement,
click to continue with the installation.
Agree
®
and insert your scanner software CD-ROM in your
, then double-click the
My Computer
.
EPSON.exe
.
OK
Epson CD-ROM
Setting Up Your Scanner
15