Software Problems - Epson Perfection 1640SU Office Scanner Basics

Make sure you select the correct
Document Source setting for
the option and your image:
Auto Document Feeder (ADF)
TPU for neg.Film
pos.Film
You need to remove jammed
paper from the auto document
feeder.
Follow the steps below:
1. Turn off the scanner.
2. Push down the release lever to
slightly raise the feeder
mechanism and release the
paper.
release lever
3. Slowly pull the jammed paper
out of the feeder mechanism.
(Be careful not to pull too hard;
the paper may tear, making it
more difficult to remove.)
64
Problem Solving
, or
TPU for
.
4. If paper is still jammed inside
the mechanism, open the cover
to remove it.
,
ADF cover
5. After removing jammed paper,
make sure that the cover is
closed, and push the feeder
mechanism down until it clicks
into place.

Software Problems

You can't open the EPSON
TWAIN driver.
Check the cable connection.
Also, make sure the scanner's
operate light is on. The scanner
should be turned on before you
start your computer. If
necessary, turn on the scanner
and restart your computer.
If you are connected via SCSI,
make sure there are no SCSI ID
conflicts.
Check that your system
recognizes your scanner and
SCSI board. In Windows 98,