Zooming Your Image
Follow these steps to zoom in on a portion of the image:
1. Press the
E-Zoom +
You see a crosshair indicating the center of the zoom-in area.
2. Use the four "arrow" buttons on the remote control to position
the crosshair in the area you want to enlarge.
3. Continue pressing the
area up to 4 times.
4. While the image is enlarged, you can:
Use the arrow buttons to pan about.
■
Press the
■
E-Zoom –
5. When you're done, press the
size.
Changing the Image's Aspect Ratio
You can use the
Aspect
aspect (width to height) ratio, depending on the input signal.
(video images only)
■
Auto
Automatically sets the aspect ratio according to the input signal.
4:3 ratio images display at 4:3, squeeze-recorded signals display at
16:9, and letterbox signals display at
below).
■
Normal
Displays images using the full projection area and maintains the
aspect ratio of the image. 4:3 ratio images project with black
bands on the sides, 16:9 images project with black bands on the
top and bottom, and 16:10 images use the entire projection area.
■
16:9
Converts the aspect ratio of the image to 16:9. 4:3 ratio images
are elongated horizontally to fit.
button on the remote control.
button to enlarge the selected
E-Zoom +
button to zoom out.
button to return to the original
E
SC
button on the remote control to change the
Zoom
ratio (described
Using the Remote Control
Arrow
buttons
E-Zoom
buttons
Aspect
button
49