Cleaning The Lens; Cleaning The Projector Case; Cleaning And Replacing The Air Filter - Epson PowerLite 400W User Manual

caution
Do not use glass cleaner to
clean the lens.
Avoid touching the lens with
your bare hands to prevent
fingerprints on or damage to
the lens surface.
Maintenance and Transportation
74

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.
Use a canister of compressed air to remove dust.
■
To remove dirt or smears on the lens, use lens-cleaning paper. If
■
necessary, moisten a soft cloth with lens cleaner and gently wipe
the lens surface.

Cleaning the Projector Case

Before you clean the case, first turn off the projector and unplug the
power cord.
To remove dirt or dust, wipe the case with a soft, dry, lint-free
■
cloth.
To remove stubborn dirt or stains, moisten a soft cloth with water
■
and a mild detergent. Then wipe the case.
Do not use wax, alcohol, benzene, paint thinner, or other
■
chemical detergents. These can damage the case.

Cleaning and Replacing the Air Filter

Your projector includes an air filter to ensure the best performance. If
dust collects on the air filter or vent on the side of the projector, clean
them as described below. Dust clogs prevent proper ventilation and
can cause overheating and damage the projector.
When the filter and vent are clogged, the projector displays the
message
The projector is overheating. Make sure nothing is
blocking the air vent, and clean or replace the air filter.