Adjusting The Image Shape; Adjusting The Brightness - Epson PowerLite 400W User Manual

Projecting
42

Adjusting the Image Shape

If the projector is tilted up or down, the images that are displayed will
be distorted. To correct the distortion or "keystone" shape, do one or
more of the following:
■ If your image looks like
off to one side of the screen, at an angle. Move it directly in front
of the center of the screen, facing the screen squarely.
If your image looks like
■
keystone correction value. Press the
projector to correct the shape of the image. After correction, your
image will be slightly smaller.
You can also make keystone adjustments using the projector's Settings
menu. See page 60.

Adjusting the Brightness

The brightness of an image depends on the source you are projecting
and the amount of light in the room. If the image is too bright or not
bright enough, here are two ways you can adjust it:
Change the
■ Brightness
■ Select or
Low High
Settings menu. (See page 61.) Low brightness mode extends the
life of the lamp and decreases the fan noise.
or , you've placed the projector
or , you need to adjust the
or
setting in the Image menu. See page 57.
for the
Brightness Control
buttons on the
Keystone
correction
buttons
option in the