Focusing And Zooming The Image; Selecting The Input Signal Setting - Epson PowerLite Cinema 200+ User Manual

Focusing and Zooming the Image

To adjust the sharpness or size of the image:
Note: Before starting, you may want to display a test pattern to facilitate adjustment. Press the
Pattern button on the remote control, then select Cross-hatching.
1. Press the
Focus
remote control. You see this screen:
2. Use the arrow buttons to adjust the image
sharpness or size.
Note: If you use the remote control, you can stand close
to the screen while focusing the image. This lets you
adjust the picture more precisely.
3. Press when done.
E
SC

Selecting the Input Signal Setting

If you're using the projector's Input A port, select the correct setting for the type of video
equipment you've connected to it:
1. Press the
Menu
2. Use the menu navigation buttons to open the
menu and select
3. Choose from these options:
■ YCbCr
for a video player that outputs an NTSC signal.
■ YPbPr
for a video player that outputs an HDTV signal.
■ RGB-Video
Note: Check the label next to the port on your video equipment, if you're unsure of which
setting to use.
or button on the projector or
Zoom
button on the remote control.
.
Input A
for a video player that outputs an RGB video signal.
menu, then open the
Setting Input Signal
21