Correcting Computer Images; Adjusting The Volume - Epson PowerLite 400W User Manual

Correcting Computer Images

If you've connected a computer and the image doesn't look right, or it
doesn't fit properly on the screen, press the
projector or the
Enter/Auto
automatically resets the projector's tracking, sync, resolution, and
position settings. You must be projecting a computer image for this
button to have any effect. Additionally, if the
the Signal menu is set to
page 59.

Adjusting the Volume

You can use the and
Vol–
increase or decrease the volume for the projector's built-in speaker.
A volume gauge appears on the screen while the volume is being
adjusted.
Enter
button on the remote control. This
Auto Setup
, the Auto function will not work. See
Off
buttons on the remote control to
Vol+
Volume control
buttons
button on the
option in
note
You can also adjust the
volume using the projector's
Settings menu. See page 60
for details.
You must adjust the volume
separately for each input
source.
Projecting
43