Epson PowerLite 400W User Manual page 100

Monitoring the Projector Over a Network
100
The following table describes the EMP Monitor status icons.
Group status icons
No warnings or problems in the projector group.
Warning or problem in a projector in the group.
Monitoring disabled. Right click the icon and select
Monitoring Enabled to begin monitoring the group.
Data is currently being updated.
Type status icons
No warnings or problems.
Warning or problem.
Monitor Password error. No monitor password was
entered when you registered the projector, or an
incorrect password was entered.
Monitoring disabled. Right-click the icon and select
Monitoring Enabled to monitor the projector.
Data is currently being updated.
Network error (projector is not connected to the
network, the power cable is disconnected, or
Network Off is selected as the Standby Mode
setting in the Extended menu; see page 62).
Network error (Esc/VP.net communication error).
Power status icons
The projector is powered on; normal status.
The projector is powered off; normal status.
The projector is powered on; abnormal status.
The projector is powered off; abnormal status.