Adjustment for Lens Extender/Shrinker
When the WHITE or shading of V is out of alignment by using the lens extender or lens shrinker, perform the following
lens adjustment after the completion of OHB fi le store.
1. Perform the automatic white balance adjustment.
WHITE button/MSU-900 → ON (lit)
2. (In the status of lens: x1) Perform the lens fi le store.
MSU menu operation:
. FILE button→ ON (lit)
. Touch panel operation
[Lens|File] → [Lens|Store] → [Store]
3. Lens extender: (x2) → ON
or lens shrinker: (x0.8) → ON
4. Perform the automatic white balance adjustment.
WHITE button/MSU-900 → ON (lit)
5. MSU menu operation:
. MAINTENANCE button → ON (lit)
. Touch panel operation
[Lens|Adjusting] → [V|Mod|Saw]
Adjustment item: R, G, B
Specifi cation:
6. Execute the lens fi le store.
MSU menu operation:
. FILE button → ON (lit)
. Touch panel operation
[Lens|File] → [Lens|Store] → [Store]
7. Lens extender: (x2) → OFF
or lens shrinker: (x0.8) → OFF
3-14 (E)
Set the V modulation correction value as required.
HDC-P1