Setup Menu; Entering The Service Menu - Sony HDC-P1 Maintenance Manual

5-1. Entering the SERVICE Menu

Some of adjustments given in this section use the setup menu. The setup menu consists of the following
menus.
Besides there is a TOP menu indicating the entire confi guration of menu items.
. USER menu
. USER MENU CUSTOMIZE menu
. OPERATION menu
. PAINT menu
. MAINTENANCE menu
. FILE menu
. DIAGNOSIS menu
. SERVICE menu
This section describes the setup menu operation as follows.
For example: When AUTO SETUP in the MAINTENANCE menu is selected from the TOP menu and
AUTO LEVEL is executed:
MENU: MAINTENANCE
PAGE: AUTO SETUP
ITEM: AUTO LEVEL
How to display the SERVICE menu
1. Turn the DISPLAY/MENU switch to the MENU side while pressing the menu control knob.
"TOP" appears at the upper right of the screen.
2. Set the cursor at TOP and press the menu control knob.
The TOP menu screen opens.
3. Set the cursor at AUTO SETUP of the MAINTENANCE menu and press the menu control knob for
at least 10 seconds.
The AUTO SETUP screen opens.
4. Set the cursor at AUTO BLACK and turn off the DISPLAY/MENU switch, and then turn the switch
to the MENU side again.
How to change the setting values
For items whose values can be modifi ed by turning the menu control knob, set values can be fi xed by
pressing the knob.
DISPLAY/MENU switch
Menu control knob
Rotate
Push on
HDC-P1
Section 5

Setup Menu

5-1 (E)