Cleaning The Air Vents; Description Of Ccd Block Number; Optional Fixtures - Sony HDC-P1 Maintenance Manual

1-13-2. Cleaning the Air Vents

Clogging of dust or foreign matters may cause a temperature increase inside the camera, which may result
in a failure.
Clean the air vents every two or three months.
1. Remove dust on the four air vent areas with a vacuum cleaner.
Air vent

1-14. Description of CCD Block Number

Every CCD unit has its own ID number called CCD block number. It shows the CCD block type and
serial number of the CCD block.
The CCD block number label is attached inside the CCD unit.
Example) ONA xxxxx
For replacing the CCD unit, refer to Section 2-1.

1-15. Optional Fixtures

Name Sony Part No.
EX-738 board A-8327-351-A
EX-1155 board A-1768-289-A
EX-1161 board A-1768-291-A
ROM-28 board A-8326-017-A
1-26 (E)
Air vent
Air vents
Serial number of the CCD block
CCD block type
Remarks
For extension of AT-163APT and RE-268PT boards
For extension of DPR-316 and IF-1129 boards
For extension of DPR-315 board
For boot program upgrade
HDC-P1