Adjusting Dolby Audio Settings; Setting Video Options - Epson MovieMate 55 User Manual

■ Default:
for the Disc Lock password and lamp hours).
■ Password:
■ Disc Lock:
5. To exit the Setup menu, press

Adjusting Dolby Audio Settings

You can adjust settings for external equipment with a DTS/Dolby
Digital Decoder or DVDs recorded in Dolby Digital.
1. Press the
Setup Page
2. Press
3. Press
can select the following settings:
■ Digital Output
Decoder to the Audio-Out port.
■ Night Mode
volume.
4. Press
5. To exit the menu, press

Setting Video Options

You can use the Visual Setup menu to adjust the signal format for external video equipment
and set other video options.
1. Press
2. Press
3. Press
40
Doing More with Epson MovieMate
Press and press
See page 36 for instructions on setting a password for locking DVDs.
See page 36 for instructions on setting a password for locking DVDs.
button on the remote control. You see the
:
to display the
Audio Setup Page
to highlight
Digital Output
: Change to
: Turn this setting on if you are watching a Dolby Digital DVD at low
to select the setting you want to change, then press
.
on the remote control. You see the Visual Setup menu.
to highlight
Option
until you see the option you want to set.
to return all settings to their factory defaults (except
.
.
or
Night Mode
if you have connected a DTS/Dolby Digital
Stream
, then press to select it.
Language
, then press to select it. You
to save it.