Adjusting Dolby Audio Settings; Setting Video And Other Options - Epson MovieMate 85HD User Manual

■ MP3/JPEG Nav:
or MPEG 1/2/4 files, you normally see a menu showing the file and folder names.
Select
Without Menu
or USB device will be shown in a list, regardless of which folders they are located in).
■ Default:
Press
for the Disc Lock password and lamp hours).
■ Password:
See page 47 for instructions on setting a password for locking DVDs.
■ Disc Lock:
See page 47 for instructions on setting a password for locking DVDs.
5. To exit the menu, press

Adjusting Dolby Audio Settings

You can adjust settings for external equipment with a DTS/Dolby
Digital Decoder or DVDs recorded in Dolby Digital.
1. Press the button on the remote control. You see the
.
Setup Page
2. Press to display the
3. Press to highlight
can select the following settings:
■ Digital Output
Decoder to the Audio-Out port.
■ Night Mode
: Turn this setting on if you are watching a Dolby Digital DVD at low
volume.
4. Press or
5. To exit the menu, press

Setting Video and Other Options

You can use the Visual Setup menus to adjust the signal format for external video equipment
and set other options.
Option Menu
1. Press on the remote control. You see the Visual Setup menu.
2. Press to highlight
3. Press until you see the option you want to set.
When you insert a disc or USB device that has MP3, WMA, JPEG,
if you don't want to see the folder names (all files on the disc
and press to return all settings to their factory defaults (except
.
Audio Setup Page
or
Digital Output
: Change to if you have connected a DTS/Dolby Digital
Stream
to select the setting you want to change, then press
.
, then press
Option
Language
.
, then press
Night Mode
to select it.
Doing More with Epson MovieMate
to select it. You
to save it.
51