Replacing The Lamp - Epson MovieMate 55 User Manual

Replacing the Lamp

The life span of the lamp is about 2000 hours in Dynamic, Living Room, and Game color
modes, and about 3000 hours in Theatre color mode.
You can check how long the lamp has been used as described on page 41. If the number
shown is close to the limit, make sure you have a spare lamp handy.
Note: Turn off this product when not in use to prolong the life of the projector.
It's time to replace the lamp when:
■
The projected image gets darker or starts to deteriorate.
■
The lamp warning light flashes orange.
■
The message
Replace the lamp
Caution: If you continue to use the lamp after you see the replacement indicators, the lamp is more
likely to break.
You can purchase a new lamp (part # V13H010L44) from an Epson authorized reseller. To
find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online
at www.epsonstore.com
Be sure to read the safety instructions in the Quick Guide before replacing the lamp.
Follow these steps to replace the lamp:
1. Turn off the power and disconnect the power cord.
2. If the projector has been on, let it cool for at least an hour.
Warning: Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully
to avoid injury.
Lamp warning light
appears on the screen when you start projecting.
(U.S. sales) or www.epson.ca (Canadian sales).
Caring for Your Epson MovieMate
45