Playing Epson MovieMate Audio Through an
External Audio System
You can connect Epson MovieMate to an amplifier, a 5.1 Stereo Surround Sound System, or
a digital audio recorder. To output sound from Epson MovieMate, the external equipment
needs to have a digital coaxial (S/PDIF) audio input port.
You will also need a digital coaxial cable, which may be provided with your external
equipment, or may be purchased from an electronics store.
1. Make sure the equipment is turned off, then connect the cable as shown:
Digital coaxial cable
2. Turn on your audio equipment and play your movie, music, or other presentation with
sound from Epson MovieMate.
3. You may need to change the
Stream
connecting to equipment that is only compliant with linear PCM. For more information,
see page 40.
You can use any of Epson MovieMate's audio controls, as described on pages 17 and 20.
26
Using Epson MovieMate with Other Equipment
Digital Output
if you are connecting a DTS/Dolby Digital Decoder or PCM if you are
D i g i
t a l C
o a x i
A u d
a l
i o - O
u t
setting in the Audio Setup Page. Select