6. Gently insert the new lamp and tighten its screws.
Caution: Don't touch the glass portion of the lamp with your bare hands; the invisible residue
left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new
lamp assembly.
7. To replace the lamp cover, slide it into position, then tighten the screw. (Epson
MovieMate won't work if the lamp cover is loose.)
8. After replacing the lamp, you need to reset the lamp timer, as described in the next
section.
Resetting the Lamp Timer
1. Connect the power cable and press the
2. Press
on the remote control. You see the Visual Setup menu.
3. Press
to highlight
4. Press
again. You see the following on the screen:
button to turn Epson MovieMate on.
, then press
to select it.
Info
Caring for Your Epson MovieMate
47