Playing Projector Audio Through An External Audio System - Epson MovieMate 85HD User Manual

Playing Projector Audio Through an External
Audio System
You can connect the projector to an amplifier, a 5.1 Stereo Surround Sound System, or a
digital audio recorder. To output sound from the projector, the external equipment needs to
have a digital coaxial (S/PDIF) audio input port.
You will also need a digital coaxial cable, which may be provided with your external
equipment, or may be purchased from an electronics store.
1. Make sure the equipment is turned off, then connect the cable as shown:
Digital coaxial cable
2. Turn on your audio equipment and play your movie, music, or other presentation with
sound from your projector.
3. You may need to change the
if you are connecting a DTS/Dolby Digital Decoder or PCM if you are
Stream
connecting to equipment that is only compliant with linear PCM. For more information,
see page 51.
You can use any of your projector's audio controls, as described on pages 27 and 31.
38
Using Epson MovieMate with Other Equipment
setting in the Audio Setup Page. Select
Digital Output