Connecting An Rgb Video Source - Epson EX100 User Manual

note
Be sure your video player is
not a component video
source. If you select the
wrong source, image quality
may suffer. Check your
video player's
documentation.
Connecting to Computers and Other Equipment
40

Connecting an RGB Video Source

1. Locate the VGA computer cable provided with the projector.
2. Connect the cable to the video port on your player and the
Computer/Component
3. If you want to play sound through the projector, see page 41 for
instructions on connecting audio cables.
4. If you don't need to make any other connections, see page 15 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, select the image source: press the
button on the remote control or press the
Search
button on the projector's control panel repeatedly until
Search
the image appears.
port on the projector.
Source