Epson EX100 User Manual page 57

■
Projection
Select (to project from the front of a screen and right side
Front
up),
Front/Ceiling
from the ceiling),
Rear
transparent screen), or
a transparent screen when the projector is mounted upside down
from the ceiling).
When you select one of the Ceiling projection methods, the
projector requires a 10-second cool-down after you turn it off.
You need to wait until you hear the projector beep before
unplugging it.
■ Operation
Enable
Direct Power On
when the power cable is connected (without pressing the
button). Enable
Sleep Mode
turn off automatically if it is idle (and no signal is received) for
30 minutes or when the A/V Mute Slide is closed. Enable
when you are using the projector above 4900 feet
Altitude Mode
(1500 meters).
■
Link 21L
This setting is available only if you select
setting. Select
Type B
wireless mouse for a USB-connected computer. See page 35 for
more information.
■
Language
Select from nine languages to be used for the projector menus.
(when the projector is mounted upside down
(to project from behind onto a
(to project from behind onto
Rear/Ceiling
if you want to have the projector start
if you want to have the projector
Link 21L
if you want to use the remote as a
Off
note
If Direct Power On is
Power
enabled, the power cable is
connected, and a power
outage occurs, the projector
High
will start when the power is
restored.
Do not use the projector at
altitudes above 7500 feet
for the
USB
(2,286 meters).
Fine-Tuning the Projector
57