Correcting Computer Images; Using The A/V Mute Slide; Shutting Down The Projector - Epson EX100 User Manual

Correcting Computer Images

If you're connected to a computer and the image doesn't look right,
press the button on the remote control or the
Auto
the projector. This automatically resets the projector's tracking, sync,
resolution, and position settings.
If the button doesn't correct the problem, you may need to
Auto
adjust the tracking or sync using the projector's Signal menu. See
page 49 for more information.

Using the A/V Mute Slide

You can use the
A/V Mute
sound when you want to redirect your audience's attention.

Shutting Down the Projector

When you've finished using the projector, follow the recommended
procedure to shut it down. This extends the life of the lamp and
protects the projector from possible overheating.
1. Turn off any equipment plugged into the projector.
2. To turn off the projector, press the red P
remote control or projector.
slide to temporarily turn off the image and
Power
button on
Enter
button on the
Displaying and Adjusting the Image
note
You must be projecting an
image for this button to have
any effect. The button
Auto
works only with computer
images projected through the
VGA port.
note
Lamp life results will vary
depending on mode selected,
environmental conditions,
and usage.
Turn off this product when
not in use to prolong the life
of the projector.
23