Toshiba Carrier MMD- AP0074BH2UL Service Manual page 76

No. Part name
1. Detachment
Drain pan
3
1) Take off fixed screws for the base plate to
2) Prepare a water receiver; take off the drain
NOTE :
When taking-off the drain cap, be sure
receive drain water using a bucket, etc.
3) Take off screws of the drain pan fixed plate
MMD-AP007 to AP012: none
MMD-AP015 to AP018: 1 position
MMD-AP021 to AP048: 2 positions
4) Remove the drain pan from the main unit.
4 Float switch
1. Detachment
1) Remove the drain pan.
2) Take off screws of the float switch fixed
3) Remove the plastic nut for fixing the float
4) Remove the float switch.
Procedure
remove the base plate from the main unit.
cap and then extract drain water accumu-
lated in the drain pan.
to remove the drain pan fixed plate.
(Refer to No. 3 )
plate.
switch.
Drain cap
Fixed screws for
the float switch
Float switch fixed base
– 76 –
Remarks
Fixed screws for the base plate
Base plate
Drain pan
Drain pan fixed plate
Float switch
Float switch
fixed base
Float switch
(Viewed from opposite side)
Plastic nut
Screw