Table of Contents
Advertisement
No.
Part name
7) Take off screws of the motor band and the
8) Take off the fan case fixed screws and
9) Remove cover of the fan case.
10) Remove the Silocco fan.
∗ ∗ ∗ ∗ ∗
Attach the Silocco fan in the reverse pro-
cedure of detachment
1) Place the Silocco fan in the arrow direc-
2) Adjust position so that clearance between
Procedure
motor earth wire.
then pull out the fan case from the fan
base.
Cautions when attaching the Silocco fan
tion → as shown in the right figure.
the Silocco fan and the fan case
becomes even and then fix the fan.
Fan case
Attaching direction of Silocco fan
4.5mm or more
– 75 –
Remarks
Fan case
Motor band
Motor earth wire
Fan motor
Fan case fixed screws
(2 pieces right/left each)
Fan case cover
4.5mm or more
Advertisement
Table of Contents
