Supply Status; Maintenance - Epson Workforce WF-7310 Series User Manual

Product Information
Displays the total number of prints, B&W prints, and color prints including items such as the status sheet from the
time you purchased the printer.

Supply Status

Select the menus on the control panel as described below.
Settings > Supply Status
Displays the approximate level of the ink and service life of the maintenance box.
When is displayed, ink is running low or the maintenance box is nearly full. When
need to replace the item as ink is expended or the maintenance box is full.
Related Information
"Replacing Ink Cartridges" on page 115
&

Maintenance

Select the menus on the control panel as described below.
Settings > Maintenance
Print Quality Adjustment:
Select this feature if there are any problems with your print outs. You can check for clogged nozzles
and clean the print head if necessary, and then adjust some parameters to improve print quality.
Print Head Nozzle Check:
Select this feature to check if the print head nozzles are clogged. The printer prints a nozzle check
pattern.
Print Head Cleaning:
Select this feature to clean clogged nozzles in the print head.
Print Head Alignment:
Select this feature to adjust the print head to improve print quality.
❏ Ruled Line Alignment
Select this feature to align vertical lines.
❏ Horizontal Alignment
Select this feature if horizontal banding appears at regular intervals in your printouts.
Ink Cartridge Replacement:
Use this feature to replace the ink cartridge before the ink is expended.
Paper Guide Cleaning:
Select this feature if there are ink stains on the internal rollers. The printer feeds paper to clean the
internal rollers.
> >
Settings Menu List Maintenance
179
mark is displayed, you