Managing The Printer; Introduction Of Product Security Features - Epson Workforce WF-7310 Series User Manual

Administrator Information
CA-signed Certificate is expired.
If there is a problem with the expiration date of the certificate, "The certificate has expired" is
displayed when connecting to Web Config with SSL/TLS communication (https). If the message
appears before its expiration date, make sure that the printer's date is configured correctly.
The common name of the certificate and the printer do not match.
If the common name of the certificate and the printer do not match, the message "The name of the
security certificate does not match···" is displayed when accessing Web Config using SSL/TLS
communication (https). This happens because the following IP addresses do not match.
❏ The printer's IP address entered to common name for creating a Self-signed Certificate or CSR
❏ IP address entered to web browser when running Web Config
For Self-signed Certificate, update the certificate.
For CA-signed Certificate, take the certificate again for the printer.
The proxy server setting of local address is not set to web browser.
When the printer is set to use a proxy server, configure the web browser not to connect to the local
address via the proxy server.
❏ Windows:
Select Control Panel > Network and Internet > Internet Options > Connections > LAN settings
> Proxy server, and then configure not to use the proxy server for LAN (local addresses).
❏ Mac OS:
Select System Preferences > Network > Advanced > Proxies, and then register the local address
for Bypass proxy settings for these Hosts & Domains.
Example:
192.168.1.*: Local address 192.168.1.XXX, subnet mask 255.255.255.0
192.168.*.*: Local address 192.168.XXX.XXX, subnet mask 255.255.0.0

Managing the Printer

Introduction of Product Security Features

This section introduces the security function of the Epson Devices.
Feature name
Setup for the
administrator
password
>

Managing the Printer

Feature type
Locks the system settings,
such as connection setup for
network or USB.
>
Introduction of Product Security Features
What to set
An administrator sets a
password to the device.
You can set or change from
both Web Config and the
printer's control panel.
205
What to prevent
Prevent from illegally reading
and changing the
information stored in the
device such as ID, password,
network settings, and so on.
Also, reduce a wide range of
security risks such as leakage
of information for the
network environment or
security policy.