Paper Configuration - Epson Stylus Pro 4880 User Manual

Paper Configuration

If you are using non-Epson paper and are experiencing problems with print
quality when using Epson Media Type settings, adjust the following settings,
as necessary.
Mode
Color Density
Drying Time
per Print Head
Pass
Description
Adjusts the saturation of Colors. Select a value between
–50% and +50%. Drag the slider to the right (+) to deepen
the color saturation of your printout or left (–) to lighten the
color saturation. You can also type a number (–50 to +50)
in the text box next to the slider.
Use this setting when you print on non-Epson papers.
Set the slider to the 0 position when you print on Epson
media.
Note:
Adjusting the color saturation of a printout may not be
possible, depending on the printing mode.
Pauses the print head for a specified period of time
between passes.
Set this value using the slider or text box. To improve print
quality by using slow ink absorption on the media, set a
higher value.
The drying time per print head pass can be set from 0 to 5
seconds, in 0.1 second increments.
Note:
If you use this setting, printing will take longer.
Printing with Mac OS X
27