Epson Stylus Pro 4880 User Manual page 156

7. Fan a stack of paper, and then tap it on a flat surface to make the edges
even.
If the paper is curled, flatten it before you load it. If it curls excessively and
jams frequently, stop using it.
8. Load the sheets with the printable face-down and the right edge of the
paper resting against the right side of the paper tray. Make sure the sheets
lie flat on the bottom of the tray. Don't load paper above the arrow mark
inside the edge guide.
Note:
❏ Always load the paper's short edge first.
❏ When you load sheets of paper, make sure to put the edges of the paper
against the right inner corner of the paper tray; otherwise, printing may
become misaligned.
❏ When you add more sheets of paper to the paper tray, always line up the
edges of the added paper to those of the paper already loaded.
156
Paper Handling