Epson Stylus Pro 4880 User Manual page 108

Button
/paper feed button
paper feed button
Menu button
You can enter Maintenance mode by turning on the printer while holding down
the pause button. See "Maintenance Mode" on page 137 for more
information.
108
The Control Panel
Description
Feeds paper in the forward direction.
Ejects cut sheet paper when
as the paper source.
Feeds the roll paper before cutting it when
Roll Auto Cut On is selected as the paper source.
Loads a sheet from the paper tray to the printing
position automatically when
as the paper source.
Changes settings when selecting settings in Menu
mode.
Feeds paper in the reverse direction as much as
the paper has been fed by using the
Feed button. If you have fed the paper forward by
hand, you cannot feed the paper in the reverse
direction by using this button.
Loads a sheet from the paper tray to the printing
position automatically if
paper source.
Changes a setting in reverse order when selecting
settings in Menu mode.
Enters Menu mode when pressed in the READY
state.
Enters the PRINTER STATUS menu if pressed during
printing.
Selects the current menu in menu mode.
Sets the selected setting in Menu mode.
Executes the item if the selected item is for
execution only.
Cleans the print head if pressed and held for 3
seconds.
Sheet is selected
Sheet is selected
Paper
Sheet is selected as the