Setting The Alert Value For Paper; Maintenance Mode; Maintenance Mode Setting Procedure - Epson Stylus Pro 4880 User Manual

Setting the alert value for paper

You can configure the printer to alert you when paper is low. Follow the steps
below.
Note:
This setting is available only when you select ROLL or SHEET as your PAPER
COUNTER setting in Maintenance mode.
1. Press Menu to enter the printer's menu system.
2. Press or
3. Press or
which setting you selected in Maintenance mode), then press
4. Press or
or 5 and 99.5 m) or the number of cut sheets (between 10 and 250) loaded
in the printer, then press
5. The screen changes so that you can select the alert value. Press
to select the alert value. For roll paper, select a value between 3 and 50 ft
or 1 and 15 m. For cut sheet paper, select a value between 5 and 50.
6. Press Menu to set the alert value, then press
READY state.

Maintenance Mode

Maintenance mode setting procedure

This section describes how to enter Maintenance mode and how to select
settings with the buttons on the control panel.
Note:
Press to return to the previous step.
to highlight PRINTER SETUP, then press
to highlight ROLL COUNTER or SHEET COUNTER (depending on
to select the length of the roll paper (between 15 and 300 ft
Menu.
Menu.
Menu.
or
pause to return to the
137
The Control Panel