Initial Setting Of The Monitor - Omron M7 Intelli IT Instruction Manual

HEM-7322T-E_D_M.fm Page 27 Friday, July 27, 2018 12:03 PM
3. Using the Device

3.6 Initial Setting of the Monitor

To delete all the information stored in your monitor, follow the instructions below.
Make sure that the power of the monitor has been off.
1.
While holding the
the [START/STOP] button for more than 5
seconds.
2.
Release the
when "CLr" appears on the display.
The "CLr" will appear on the display when your monitor has been initial
setting.
3.
Press the [START/STOP] button to turn the monitor off.
Notes:
• The monitor will automatically turn off after 2 minutes.
• Initial setting of the monitor will not delete the information in the app.
When using this monitor again, please delete the registration of the monitor in the app first, then pair
your monitor.
button down, press
and [START/STOP] button
EN
27