Configuring For Appletalk - Epson Stylus Color 850Ne Setup Manual

Setup Guide: Configure the Printer
Before you can print using TCP/IP, you still need to do the
following on each computer that will use the printer:
Install the printer driver (see page 36)
Add a printer port (see page 38)

Configuring for AppleTalk

To use your printer on an AppleTalk network, you need to
configure the Ethernet card for AppleTalk. Follow these steps to
configure your card using EPSON Net!2:
1. Open the EPSON Net!2 utility.
You see a window like the following:
32