Installing Epson Net!2 On A Macintosh; Installing Status Monitor - Epson Stylus Color 850Ne Setup Manual

Setup Guide: Install the Network Software

Installing EPSON Net!2 on a Macintosh

1. Create a folder for EPSON Net!2 on your hard disk.
2. Insert the EPSON Stylus COLOR 850Ne CD-ROM in
your drive.
3. Copy EPSON Net!2 to the folder you created.
After you install EPSON Net!2, use it to configure your printer
for AppleTalk, following the steps on page 32.

Installing Status Monitor 2

EPSON Status Monitor 2 is a single utility that you install in
two parts. These two parts work together to allow you to see
your printer's specific status information over the network.
Status Monitor 2 lets you monitor information from the server
or from any of the workstations where you install it. It gives you
ink levels in the printer and notifies you if the printer has any
problems. It does create network traffic, however, so you may
want to limit the number of users who monitor the printer.
Status Monitor 2 also includes EPSON TCP/IP Printing,
which allows Windows 98 and Windows 95 users to print with
TCP/IP. If you have Windows 98 or Windows 95 systems and
use TCP/IP for printing, you need to install Status Monitor 2
on each workstation that uses the printer.
Write down your settings in the spaces provided; you need to
use the same settings when you install each part of Status
Monitor 2.
13