Installing Epson Net! For Macintosh; Using Epson Namer To Rename Your Printer - Epson EPL-N2000 Network Administrator's Manual

Installing EPSON Net! for Macintosh

Follow these steps:
1. Create a folder for EPSON Net! for Macintosh on your hard
disk drive.
2. Insert the EPSON Net! for Macintosh diskette.
3. Double-click on the diskette icon to open it, and copy
EPSON Namer and EPSON Zoner to the new folder.

Using EPSON Namer to Rename Your Printer

Because your EPL-N2000 has a default name, you need to
rename it to avoid having multiple EPL-N2000 printers on the
same network with the same name.
The EPSON Namer utility lets you rename printers in any zone
on the network, including the local zone.
Note:
If your printer will be serviced by a print spooler, rename the printer
before configuring the spooler.
Follow these steps:
1. Make sure the EPL-N2000 is turned on. Wait at least a
minute after turning on the printer to allow for PostScript
initialization.
Note:
Your printer may not configure properly if PostScript initialization
is not complete.
Configuring the EPL-N2000 for AppleTalk 3-3